Free shipping for all orders over $200. Only in this week

GEPRC DarkStar22 O4 Pro CineWhoop FPV Drone with DJI O4 Air Unit Pro, ELRS 2.4G, 2-4S AIO

0 Reviews Write a review
Availability In Stock

$599.00

Description

Overview

GEPRC DarkStar22 O4 Pro is a CineWhoop FPV Drone designed for compact, portable performance, featuring the DJI O4 Air Unit Pro VTX system for HD transmission and up to 4K 120fps recording support. It uses the TAKER F405 20A ELRS2.4 2-4S AIO flight system with an integrated ELRS 2.4G receiver, plus a five-point damping structure designed to improve anti-vibration performance for stable footage.

Key Features

  • Equipped with O4 Pro HD VTX: supports up to 4K 120fps recording.
  • Built-in Receiver: directly bind and fly with ELRS 2.4G; no external receiver required.
  • 5-Point Damping Ultra-Stable Footage: innovative structural design significantly improves anti-vibration performance, ensuring every frame stays rock-steady.
  • Dazzling Light Strips: COB strip with Mini controllable BEC; three brightness levels.
  • Reserved GPS Mount: reserved GPS space within a compact body, improving flight positioning and outdoor safety. Note: All versions do not include GPS by default; purchase and install separately.
  • Flight controller/ESC: Compact F405 BGA processor with 20A ESC delivers strong, stable flight performance.
  • Clear Pad Markings: each solder pad is clearly labeled for quick recognition and efficient installation.
  • Easy Disassembly with Six Screws: remove six screws to separate the upper and lower body for inspection and component replacement.
  • Two options available: O4 Air Unit Pro Version / WTFPV Version (without VTX).

Customer service: https://rcdrone.top/ or support@rcdrone.top.

Specifications

Model DarkStar22 O4 Pro / DarkStar22 WTFPV
Frame GEP-DS22
Main Plate Thickness 2.5mm
Wheelbase 100mm
Flight System TAKER F405 20A ELRS2.4 2-4S AIO
MCU STM32F405
Gyro ICM 42688-P
Flash 16MB
FC Firmware GEPRC_TAKER_F405 AIO
ESC 8Bit 20A
Motors SPEEDX2 1104 7500KV
Propellers Gemfan 2219-3
Battery Connector XT30U-M
Receiver PNP (O4 Pro built-in RX) / ELRS2.4G
Recommended Battery GEPRC Storm LiHV 3S 720mAh
Flight Time 6 min 45 sec
O4 Pro VTX Antenna DJI O4 Air Unit Pro Antenna
O4 Pro Camera DJI O4 Air Unit Pro Camera Module
O4 Pro VTX Module DJI O4 Air Unit Pro VTX Module
Weight 126.8g (O4 Pro) / 93g (WTFPV)

Flight time note: all flight times are tested under smooth cruising conditions. Actual duration may vary due to firmware version, pilot skill, and environmental factors. Data is for reference only.

Setup Notes (LED/Mini BEC Control)

To use the controllable Mini BEC and LED strip, enter the following commands in Betaflight CLI:

resource SERIAL_TX 5 none
resource PINIO 2 C12
set pinio_config = 129,1,1,1
set pinio_box = 39,40,41,42
save

After flashing, enable the channel in the Modes tab.

Applications

  • Indoor
  • Party
  • Sports
  • Park
  • Forest

What’s Included

Product List (shown: O4 Pro ELRS 2.4G version; actual accessories may vary by configuration):

  • DarkStar22 Drone x 1
  • Prop Guard (Black) x 1
  • Canopy (Grey) x 1
  • Camera Cover (Grey) x 1
  • Battery Pad x 1
  • Gemfan 2219-3 Props (pairs) x 2
  • 10*120mm Battery Strap x 1
  • L-shaped Hex Wrench 1.5mm x 1
  • Battery Anti-slip Pad x 2
  • Damping Ball Punch Tool x 1
  • Binding Pin x 1
  • USB Adapter Board x 1
  • 5P Terminal Cable x 1

Spare Screw Pack Includes:

  • Damping Balls x 2
  • M2*7 Round-head Screws x 4
  • M2*6 Round-head Screws x 4
  • M2*4 Round-head Screws x 4
  • M2*7 Countersunk Self-Tapping Screw x 4
  • M2*6 Round-head Screws x 4
  • M2*5 Round-head Screws x 4

Reviews

There are no reviews yet.

Be the first to review “GEPRC DarkStar22 O4 Pro CineWhoop FPV Drone with DJI O4 Air Unit Pro, ELRS 2.4G, 2-4S AIO”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top

Search For Products

Product has been added to your cart
Compare (0)